How to work with scale
To work with scale
Step 1
To work with scale, first, you need to move the mouse to the Draw toolbar and then click the Stretch command.
Step 2
Next, you need to select the object.
Step 3
Now, you must specify the Base point and then drag and draw the Scale factor.
Edited By: Norasyikin Mahmud
© 2001 ISC
All rights reserved. All other product names and trademarks are registered properties of their respective owners.
121101
How to work with 3D Rotate
To work with 3D Rotate
Step 1
To work w ith 3D, first, move the mouse to the Draw toolbar and then click the Stretch command.
Step 2
Nest, select the object and then press the Enter key to end the selection.
Step 3
Next, you need to set the Base point or displacement: and the second point of displacement.
To work with rotate command
Step 1
To work with rotate command, first, move the mouse to the Draw toolbar and then cikk the Rotate command.
Step 2
Next, you have to select the object.
Step 3
Now, you have to specify the Base point and the Rotation angle
To work with 3D Rectangular Array
Step 1
To work with 3D Rectangular Array, first, move the mouse to the Draw toolbar and then click the 3D Rectangular Array command.
Step 2
Next, select the object.
Step 3
Now, you need to select the following;
To work with 3D Polar Array
Step 1
To work with 3D Polar Array, first, you need to move the mouse to the Draw toolbar and then Click the 3D Polar Array command.
Step 2
Later, you need to select the object.
Step 3
Now, you ought to set the following;
To work with Polar Array
Step 1
To work with Polar Array, first, move the mouse to the Draw toolbar and then click the Polar Array command.
Step 2
Next, you need to select the object.
Step 3
Now, you have to do the following;
To work with rectangular array
Step 1
To work with rectangular array, first, you need to move the mouse to the Draw toolbar and then click the Rectangular Array command.
Step 2
Next, you need to select the object.
Step 3
Then, you ought to do the following;
How to work with Mirror
To work with Mirror
Step 1
To work with Mirror, the first thing you need to do is to move the mouse to the Draw toolbar and then click the Mirror command.
Step 2
Later, you must select the object.
Step 3
Now, you have to specify the First point of mirror line: and then specify the Second point: later, you need to delete old objects.
To work with Offset command
Step 1
To work with Offset command, first, you need to move the mouse to the Draw toolbar and then click the Offset command.
Step 2
After that, just select the object that you want to copy.
Step 3
Now, specify the Through and the Second point: after that, you need to select the object to offset: and finally, drag and draw the Side to offset.
To work with Copy command
Step 1
To work with Copy command, first, move the mouse to the Draw toolbar and then choose the Copy object command.
Step 2
Next, select the object that you want to copy.
Step 3
Later, you have to specify the displacement and after that, drag and draw then Second point of displacement, as shown by the picture below.
To work with Move command
Step 1
To work with Move command, the first thing you need to do is to move the mouse to the Draw toolbar and then click the Move command.
Step 2
Next, you ought to select the object that you want to move.
Step 3
Later, you have to specify the displacement and then drag and draw then Second point of displacement:
To insert the single line text
Step 1
To insert the single line text, the first thing you need to do is to move the mouse to the Draw toolbar and then click the Single line Text command.
Step 2
Next, you need to place the insertion point in the page where you want to insert it.
Step 3
Now, you need to specify the start point and then enter the Height <7.4020>: after that, you need to enter the Rotation angle <9>:
Step 4
Finally, just type the Text, for example, Hello My Fans.
To insert the DText
Step 1
To insert the Dtext, first, you need to move the mouse to the Draw toolbar and then click the DText command.
Step 2
After that, just place the insertion point in the page where you want to insert it.
Step 3
Now, you need to specify the Start and then enter the Height <0.2000>: after that, you need to enter the Rotation angle <0>:
Step 4
Finally. Just type the Text:
To insert the text
Step 1
To insert the text, the first thing you need to do is to move the mouse to the Draw toolbar and then click the Text command.
Step 2
After that, just place the insertion point in the page where you want to insert it.
Step 3
Next, you can enter the text in the text box and click the Ok button to insert the text in the page.
Step 4
Now, the text has been inserted in the page.
How to insert the pattern
To insert the pattern
Step 1
To insert the pattern, the first thing you need to do is to move the mouse to the Draw toolbar and then click the Hatch command.
Step 2
Next, just click the Select Objects button and then select the object you want to add the pattern.
Step 3
Then, in the Pattern list box, just select the pattern that you want and click the Apply button.
Step 4
Now, you could see that the pattern is being added in the object.
Before
After
To create the point
Step 1
To create the point, the first thing you need to do is to move the mouse to the Draw toolbar and then click the Point command.
Step 2
After that, just place the insertion point in the page where you want to insert it.
Step 3
Now, you have to use the mouse to create the point.
